Tutorial Flash Corby B3210 dengan OPtiFlash

Tutorial Flash Corby B3210 dengan OPtiFlash

Yang dibutuhkan sebelum melakukan Flashing:

1. hp samsung corby B3210
2. Kabel Micro USB (pake CA101 juga bisa)
3. Optiflash
4. Firmware + Driver

Pastikan batere kondisi minimal 50%

Caranya:

Dalam kondisi mati tekan * dan tancapkan kabel USB, tunggu sampai PC detect perangkat, install driver.Liat Port berapa Hp terhubung







Buka Optiflash.exe

Pilih Customer T: Rodeo (Intel Sibley 1024/256, USB)
Check Code Binary and CSC Binary(Default) dan Erase all Unused Regions.
Pilih File Code dan File CSC
Pilih com dimana hp terdetek






Klik Flash , jika diminta ketik "yes" (tanpa petik ya) dan klik OK






Tunggu proses







Sampai proses selesai dengan pesan "All is well"




Untuk Firmwarenya bisa di Download Disini [Versi Bahasa Indonesia]


Versi Bahasa Inggrisnya:

Tools : Samsung B3210 CorbyTXT Downloader - Original USB cable.

Flashing Steps :

1. Run Samsung B3210 CorbyTXT Downloader.
2. Select Customer T: Rodeo (Intel Sibley 1024/256, USB).
3. In Flash Option section check: Code Binary and CSC Binary(Default).
4. Also check this Option: Erase all Unused Regions.
5. Connect the phone in Download mode: Press * and connect USB cable to phone.
6. Now select the Com Port that the phone takes.
7. Select the S3 Flash file and CSC file too, each in his field.
8. Click on Flash button and type YES in the message box then click OK to Start the process.
9. Do not touch or remove the cable till the Program telsl you: All is Well.
10. Turn On the phone and do full reset by this code: *2767*3855#