Cara mengatasi BlackBerry mati total (matot) dan nuked!!

Cara mengatasi BlackBerry mati total (matot) dan nuked!!

Jika BlackBerry sobatt sedang trouble, mungkin beberapa langkah pengerjaan dibawah ini bisa membantu:

Dari berbagai kasus yang terjadi pada BlackBerry, seperti bold 9000, gemini 8250, aries 8350, curve 8320, javelin 8900, pearl 3G 9105, davis 9220, armstrong 9320, curve 9300 3G, apollo 9360, 9370 – 9380, storm 9500, strom2 9550, tour 9630, essex 9650, onyx 9700, onyx2 9780, bellagio 9790, torch 9800, 9810, monza 9860, 9850, dakota 9900, montana 9930, Porsche Design P’9981 dll. ternyata permasalahan yang juga sering didapat adalah BB dalam kondisi mati total (matot) dan hanya led yang kedip-kedip merah atau hidup loading sebentar terus restart lagi atau juga malah tidak ada tanda – tanda kehidupan sama sekali. Kasus ini ada dua kemungkinan bisa karena software bisa juga karena hardware.

1. Sebelum sobatt melangkah lebih jauh, jika BB tidak ada tanda – tanda kehidupan sama sekali.. maka pastikan dulu battery Blackberry dalam kondisi bagus dan terisi full, ukur dengan multitester jika punya, catu daya sekitar -+ 4v atau bisa pinjam battery BB teman yang sama dan coba hidupkan di BB sobatt, apakah bisa hidup?? coba dengan melepas simcard dan mmc serta battery -+ 5menit setelah itu coba pasang kembali.

2. Jika usaha demikian belum berhasil, itu artinya permasalahan ada di software atau hardware (ic power, ic zocus, ic flash, ic cpu atau komponen lain).

3. Maksimalkan dulu ke software, coba dengan reload OS.
Jika kondisi ketika blackberry dinyalakan, lampu LED menyala merah untuk beberapa detik, kemudian akan terlihat layar putih dan jam pasir dan kemudian kembali mati, kemudian setelah beberapa detik blackberry akan menyala lagi, proses booting ini berulang terus maka keadaan demikian disebut “nuked”.

Atau BB hanya kedip-kedip lampu led merahnya
Untuk penyelesaiannya bisa dicoba dengan instal ulang / reload  OS

Prosedur:

• Instal program desktop manager dan firmware BlackBerry yang akan di reload os
• Browse ke folder AppLoader menggunakan explorer, biasanya terletak di C:\Program Files\Common Files\Research In Motion\AppLoader kemudian delete file vendor.xml di dalam direktory AppLoader
• Jalankan Program loader.exe di dalam direktory >> C:\Program Files\Common Files\Research In Motion\AppLoader>> double klik loader.exe
• Klik Next sampai ada dialog “Communication Port Selection”
• Pasang Kabel USB yang sudah terhubung BB ke PC
• Klik Next, ulangi beberapa kali bila perlu sampai proses install OS dapat berjalan

4. Kode kedipan lampu LED pada saat awal loading menunjukkan suatu nilai biner yang menginformasikan pesan dari bootROM.
biner 1, nyala kedip lampu merah sedangkan biner 0 dengan tidak nyalanya led (off). Apabila led menyala secara kontinyu, ini merupakan pesan sedang melakukan security wipe, apabila led menyala kontinyu tidak pada saat melakukan security wipe, ini mengindikasikan adanya kerusakan hardware.

• 1 (desimal = 1) Bukan problem, kode ini adalah normal saat restart
• 11 (desimal = 3) Tidak ada sistem operasi di dalam blackberry, lakukan reload sistem operasi dengan MFI
• 101 (desimal = 5) Bad OS CRC
• 111 (desimal = 7) Missing OS CRC
• 1011 (desimal = 11) Missing OS Trailer
• 1101 (desimal = 13)OS Not Signed, coba loading OS kembali
• 1111 (desimal = 15) OS Signature Invalid, coba loading kembali OS dan biarkan mati tanpa baterai selama hampir 30 menit, kemudian coba hidupkan kembali. Apabila tetap muncul pesak kesalahan, coba lakukan penggantian flash.
• 10101 (desimal = 21) Unknown Flash Manufacturer, coba lakukan penggantian flash
• 10111 (desimal = 23) Flash Initialization Problem, coba lakukan penggantian flash
• 11011 (desimal = 27) Flash Erase Failure ,coba lakukan penggantian flash
• 11101 (desimal = 29) Flash Operation Out Of Range
• 11111 (desimal = 31) Bad BootROM CRC, coba lakukan penggantian flash
• 101011 (desimal = 43) USB Driver Error
• 101101 (desimal = 45) No BootROM CRC
• 101111 (desimal = 47) Flash Write Failure, coba lakukan penggantian flash
• 110101 (desimal = 53) Invalid Memory Configuration Table
• 110111 (desimal = 55) Password Not Initiated
• 111011 (desimal = 59) RAM Initialization Problem, coba lakukan penggantian flash
• 111101 (desimal = 61) Cache No Pages Free
• 111111 (desimal = 63) Cache Invalid Page Type
• 1010101 (desimal = 85) Random Number Failure
• 1010111 (desimal = 87) OSStore Failure
• 1011011 (desimal = 91) Security Init Failure
• 1011101 (desimal = 93) NAND failure
• 1011111 (desimal = 95) General Assert Failure
• 1101011 (desimal = 107) GPIO failure
• 1101101 (desimal = 109) Runtime library failure
• 1101111 (desimal = 111) Exception: undefined isntruction
• 1110101 (desimal = 117) Exception: SWI
• 1110111 (desimal = 119) Exception: Prefetch Abort
• 1111011 (desimal = 123) Exception: Data Abort
• 1111101 (desimal = 125) Exception: Reserved
• 1111111 (desimal = 127) Exception: IRQ
• 10101011 (desimal = 171) Exception: FIQ

JVM Error Code

• 101     Internal JVM error.
• 102     Invalid code in file system. The .cod files in the handheld have been checked for modification and it has been determined that there is a problem with one or more .cod files.
• 103     The starting address for the boot .cod file cannot be found. This might mean that a boot .cod file has not been installed on the handheld, or that its format is invalid or corrupt.
• 104     An uncaught Java exception was thrown in the Java code and diagnosed by the JVM. Execution can be continued or the handheld can be attached to a debugger on a desktop through a serial or USB cable. The event log should contain the traceback of the thrown exception.
• 105     An OS file system API returned an error status for a certain operation. This can indicate a corrupt file system or an error in the JVM.
• 106     An error has been detected in the graphics system of the handheld.
• 107     Internal JVM error.
• 108     Internal JVM error.
• 109     Internal OS error.
• 110     Non-idle event downtime error. A problem has been detected in the accumulation of JVM down time that represents how long the JVM has been idle. This indicates an error in either the OS code or the JVM code.
• 200     Application manager threw an uncaught exception. The application manager event thread threw an uncaught exception and so cannot continue running.
• 201     Initialization of the cryptographic system failed and the handheld cannot continue to operate.
• 202     An attack on the key store has been detected, and the handheld cannot continue to operate.
• 203     The application manager console process, usually the Home screen ribbon, has failed, like due to an uncaught exception.
• 501     Internal error.
• 502     All processes exited. The last Java process has terminated, and there is nothing left to execute.
• 503     Internal error.
• 504     Internal error.
• 505     Internal error.
• 506     An uncaught Java exception was thrown in the initial VM Java thread thus killing the only live thread in the system. The event log contains the traceback for the exception.
• 507     A dependency on a .cod file could not be satisfied due to a missing .cod file. Load the missing .cod file onto the handheld.
• 508     Invalid object. A problem has been detected with a debugger command to the VM.
• 516     Error occurred during garbage collection, which might indicate a corrupted file system.
• 510     All threads are waiting on objects, which results in a deadlock. The system cannot recover from this state since no thread can release a lock.
• 511     A problem has occurred during debugging.
• 515     The reachable objects form a group that cannot be represented properly by the VM because there are too many objects or the total size of the objects is too large.
• 516     When committing a persistent object, the VM found that the persistent store id counter has reached its limit. The object was not committed.
• 517     An inconsistency has been detected in the VM persistent object store.
• 518     Internal error.
• 519     Internal error.
• 520     Internal error.
• 521     Indicates that Object.wait() has been executed by a thread that holds a lock on another object; occurs only in simulator if the JvmDebugWaits application switch.
• 522     A thread has acquired two locks on objects in an order that doesn’t match the order that previous locks for the two types were acquired, which indicates a future potential deadlock situation; reported only in the simulator when the JvmDebugLocks application switch is set.
• 523     A critical Java process has died and the device cannot continue to operate normally.
• 524     An object has been marked as recovered by the Low Memory Manager but it was not freed during a garbage collection. This is only checked in the simulator under the control of the JvmDebugLMM application switch.
• 525     Bad persistent object. An auto-commit operation during a garbage collection has detected a non-persistent object reachable from the pers

Semoga bermanfaat